?> 50Hz 350kW 438kVA Deutz BF8M1015C-LA G1A Diesel Generator

50Hz 350kW 438kVA Diesel Generator with Deutz BF8M1015C-LA G1A Engine

50Hz 350kW 438kVA Diesel Generator with Deutz BF8M1015C-LA G1A Engine - Image 1
  • 50Hz 350kW 438kVA Diesel Generator with Deutz BF8M1015C-LA G1A Engine - Image 1
  • 50Hz 350kW 438kVA Diesel Generator with Deutz BF8M1015C-LA G1A Engine - Image 2

Short Description

GENLITEC POWER GPD438D5 / GPD438S5 diesel generator set powered by Deutz BF8M1015C-LA G1A, with prime power 350kW/438kVA and standby power 380kW/475kVA.

  • ModelGPD438S5
  • Prime Power (PRP)350kW/438kVA
  • Standby Power (ESP)380kW/475kVA
  • EngineBF8M1015C-LA G1A
  • Fuel Consumption (100%)91L/H
Share

Product Details

Product Tags

50Hz 350kW 438kVA Diesel Generator with DEUTZ BF8M1015C-LA G1A Diesel Engine

Introduction

The GENLITEC POWER GPD438D5 / GPD438S5 is a 438kVA DEUTZ diesel generator set designed for dependable prime, standby and backup power. Powered by the DEUTZ BF8M1015C-LA G1A diesel engine, this 50Hz generator delivers 350kW/438kVA prime power and 380kW/475kVA standby power at a rated speed of 1500RPM.

Equipped with a 660L fuel tank and configurable three-phase, four-wire output, the GPD438 series supports voltage options of 220/380V, 230/400V and 240/415V. The GPD438D5 open-type diesel generator allows convenient access for installation and maintenance, while the GPD438S5 silent diesel generator features a sound-attenuated enclosure for noise-sensitive environments and outdoor applications. These DEUTZ-powered generator sets are suitable for factories, commercial buildings, construction sites, agricultural facilities, telecommunications infrastructure and emergency power systems.

Generator Set

Open Type Model GPD438D5
Silent Type Model GPD438S5
Frequency 50Hz
Phase & Wires 3 Phase, 4 Wires
Power Factor 0.8
Prime Power 350kW/438kVA
Standby Power 380kW/475kVA
Rated Voltage 220/380V; 230/400V; 240/415V
Rated Speed 1500 RPM
Fuel Tank Capacity 660L

Diesel Engine

Engine Model DEUTZ BF8M1015C-LA G1A
Cylinder Number 8
Cylinder Arrangement V-Type, 90°
Engine Type 4-Stroke Diesel
Aspiration System Turbocharged with Charge Air Cooling
Cooling Method Water Cooled
Governor Type Electronic
Bore x Stroke 132 x 145 mm
Compression Ratio 16.5:1
Rated Speed 1500 RPM
Displacement 15.874L
Prime Power (Engine) 388kW
Standby Power (Engine) 418kW
Combustion System Direct Injection
Oil Capacity 48L
Coolant Capacity 21L (Engine Only)
Electric Starting System DC 24V

Fuel Consumption

100% Prime Load 91L/H
75% Prime Load N/A
50% Prime Load N/A
25% Prime Load N/A

Alternator

Number of Phase 3
Rated Power 360kW/450kVA
Frequency 50Hz
Power Factor 0.8
Poles 4
Temperature Rise 125K
Terminals 6/12
Insulation Class H Class
Ambient Temperature 40℃
IP Rating IP23
Excitation System Self-Excited
Bearing Single Bearing
Coating Vacuum Impregnation
Voltage Regulator A.V.R
Coupling Flexible Disc

Control Panel

○ Emergency stop button ○ Main circuit breaker
○ Float battery charger ○ Manual/Auto start control panel
○ Fuel level meter ○ Controller power switch
○ Alarm buzzer ○ Remote monitoring interface

SOUND ATTENUATED ENCLOSURE

The GPD438S5 silent diesel generator is equipped with a sound-attenuated enclosure designed to reduce operating noise and provide protection for outdoor applications.

○ Sound-attenuated enclosure for reduced noise levels

○ Weatherproof design for outdoor installation

○ Internal exhaust silencer for effective noise reduction

○ Corrosion-resistant construction for long-term outdoor use

○ Service access doors for convenient maintenance

○ Suitable for commercial, industrial and standby power applications

Options

○ ATS for automatic start and stop when utility power fails or returns

○ Remote Monitoring System

○ Water-Jacket Heater

○ Synchronization system

○ AREP excitation system

○ PMG (Permanent Magnet Generator) excitation system

Applications

The GENLITEC POWER 350kW/438kVA DEUTZ diesel generator set is suitable for a wide range of prime, standby and backup power applications, including:

○ Commercial and office buildings

○ Industrial facilities and factories

○ Construction and job sites

○ Agricultural and rural facilities

○ Telecommunication and remote sites

○ Emergency and standby power systems

Why Choose GENLITEC POWER

GENLITEC POWER diesel generator sets combine dependable power generation with practical configuration options for commercial, industrial and standby applications.

○ DEUTZ BF8M1015C-LA G1A diesel engine

○ 350kW/438kVA prime power and 380kW/475kVA standby power

○ Multiple voltage configurations available

○ Open and sound-attenuated configurations available

○ 660L fuel tank for extended operating intervals between refills

○ Factory-direct supply with customized generator set solutions

For more information, please visit the GENLITEC POWER® Why Choose GENLITEC POWER page.

Warranty

GENLITEC POWER provides a standard warranty of 12 months or 1000 working hours, whichever comes first. For details, please refer to the GENLITEC POWER® Warranty Policy.

FAQ

Q: What is the rated power of the GPD438D5 / GPD438S5 generator set?
A: The generator set provides 350kW/438kVA prime power and 380kW/475kVA standby power.
Q: Which diesel engine powers the GPD438 series?
A: It is powered by the DEUTZ BF8M1015C-LA G1A eight-cylinder, 15.874L V-type diesel engine with turbocharging and charge air cooling.
Q: What voltage configurations are available?
A: Available voltage configurations include 220/380V, 230/400V and 240/415V, depending on the selected configuration.
Q: What is the difference between the open and silent generator models?
A: The GPD438D5 is the open-type model for installations requiring convenient equipment access, while the GPD438S5 features a sound-attenuated enclosure for applications requiring noise reduction and weather protection.
Q: What are the frequency and rated speed of the generator set?
A: The generator set operates at 50Hz with a rated speed of 1500RPM.
Q: Is remote monitoring available?
A: Yes. A Remote Monitoring System is available as an optional configuration for remote status monitoring and generator set management.
Q: What is the warranty period for the GPD438D5 / GPD438S5?
A: GENLITEC POWER provides a standard warranty of 12 months or 1000 working hours, whichever comes first.

  • Previous: 50Hz 800kW 1000kVA Diesel Generator with Perkins 4008TAG2A Engine
  • Next: 50Hz 120kW 150kVA Diesel Generator with SDEC SC7H205D2 Engine

  • Related Products