GPC250S5 Diesel Generator Set for a Building Project in Malaysia

Project Overview

In February 2022, a customer in Malaysia selected GENLITEC POWER to provide a standby power solution for a building project.

The project required a diesel generator set to provide backup power during mains power interruptions. Based on the required capacity and application, GENLITEC POWER supplied a GPC250S5 diesel generator set powered by a DCEC CUMMINS 6LTAA8.9-G2 engine.

The generator set was installed and commissioned for standby power use in the customer's building.

Project Specifications

Customer Requirement

The customer required a standby generator set for a building where a reliable backup power source was needed during interruptions to the utility supply.

The generator capacity needed to provide sufficient backup power for the building while the equipment configuration also needed to suit a building installation.

GENLITEC POWER Solution

GENLITEC POWER selected the GPC250S5 as the generator configuration for the project. The unit provides 250 kVA Prime Power and 275 kVA Standby Power, with a power factor of 0.8.

The generator set combines a DCEC CUMMINS 6LTAA8.9-G2 engine, GENLITEC POWER alternator, and SMARTGEN HGM6120N controller.

The unit was supplied with a soundproof canopy configuration to suit the building application.

Engine and Alternator Configuration

The GPC250S5 is powered by the DCEC CUMMINS 6LTAA8.9-G2 diesel engine. The engine is widely used in power generation and industrial applications.

The engine is matched with a GENLITEC POWER alternator to provide the required electrical output for the generator set.

Soundproof Canopy for Building Installation

The GPC250S5 uses a soundproof canopy designed for applications where the generator needs to operate in environments where noise control is an important consideration.

The enclosed configuration also provides protection for the generator components and allows the unit to be used in a range of commercial and building applications.

Control System

The generator set is equipped with a SMARTGEN HGM6120N controller for generator monitoring and control.

The controller monitors key operating parameters and generator status, including:

○ Engine speed

○ Generator voltage

○ Frequency

○ Running status

○ Alarm conditions

Installation and Commissioning

The GPC250S5 was installed and commissioned for the customer's building in Malaysia in February 2022.

The completed installation provided the building with a dedicated standby generator set for use when the normal utility power supply is interrupted.

Application

This type of generator configuration can be used for standby power applications including:

○ Commercial buildings

○ Office buildings

○ Residential buildings

○ Hotels

○ Shopping centers

○ Schools and institutions

○ Other commercial and building standby power applications

Project Result

The GPC250S5 was successfully installed and commissioned for the building project in Malaysia, providing standby power for the customer's facility.

The project demonstrates GENLITEC POWER's experience in supplying diesel generator sets configured according to the required power capacity and application.

Conclusion

This Malaysia building project is an example of GENLITEC POWER's diesel generator applications in commercial and building environments.

The GPC250S5 provides 250 kVA Prime Power and 275 kVA Standby Power, combined with a CUMMINS engine, GENLITEC POWER alternator, SMARTGEN controller, and soundproof canopy configuration.

Contact GENLITEC POWER to discuss your diesel generator requirements and project application.